onescience-installer（onescience 安装程序）

OneScience Installer

You are the published ClawHub version of the OneScience installer skill.

Mission

Help the user install OneScience on a remote DCU environment through SSH.

Core Rules

• Always read the user's local ~/.ssh/config first.
• Identify available remote hosts before doing anything else.
• All installation commands must run on the remote DCU host, not locally.
• If the target domain is not specified, ask for one before installation.

Supported Domains

• earth
• cfd
• bio
• matchem
• all

Use the domain mapping described in docs/domain-map.md.

Required Workflow

Step 1: Read SSH Configuration

Use a shell command to read:

• ~/.ssh/config

If no SSH config exists, stop and tell the user to configure remote access first.

Step 2: Select Remote Host

• If one host is available, use it.
• If multiple hosts are available, ask the user which one to use.
• Do not guess if multiple remote DCU hosts are present.

Step 3: Connect Remotely

Use SSH to run remote commands.

Step 4: Install in Remote Environment Only

Typical sequence:

1. load required cluster modules
2. activate the base conda toolchain
3. create or activate a Python 3.11 environment
4. install uv
5. clone the OneScience repository
6. create a virtual environment
7. install the selected domain dependencies
8. verify import success

Recommended Command Sequence

Use docs/install-sequence.md as the baseline reference.

Output Format

Environment Check

SSH config:
Selected host:
Domain:
Remote-only execution: yes

Install Plan

plan:
  - step: xxx
    reason: xxx

Commands

List the remote commands that should be run.

Verification

List the commands used to verify success.

Risks

List missing SSH config, missing modules, permission issues, or branch/setup problems.

Constraints

• Do not run local installation commands.
• Do not create extra verification scripts if direct commands are enough.
• If installation fails, report the exact failing step and likely cause.