workflow-orchestrator（工作流程协调器）

Aura Frog Workflow Orchestrator

Priority: CRITICAL - Use for complex feature implementations Version: 1.0.0

When to Use

USE for:

• New features
• Complex implementations
• Tasks > 2 hours
• Multi-file changes
• Tasks requiring TDD workflow

DON'T use for:

• Bug fixes → use bugfix-quick
• Quick refactors → direct edit
• Config changes → direct edit
• Simple questions → just answer

Pre-Execution Checklist

1. agent-detector → Select lead agent (MANDATORY)
2. project-context-loader → Load conventions (MANDATORY)
3. Show agent banner at start of response
4. Verify task complexity - if simple, suggest lighter approach

Token Budget Per Phase

CRITICAL: Stay within budget to avoid context explosion.

token_budget[9]{phase,max_tokens,format}:
  1,500,TOON summary only - NO prose
  2,1500,Technical design in TOON + minimal prose
  3,800,Component list in TOON
  4,600,Test cases in TOON table
  5a,1000,Test code only - no explanations
  5b,2000,Implementation code - minimal comments
  5c,500,Refactor summary in TOON
  6,800,Review findings in TOON table
  7-9,300 each,Status only

Phase 1 HARD CAP: 500 tokens. Use /workflow:phase1-lite format.

9-Phase Workflow

Gate Legend:

• ✋ Approval = Must wait for user approval before continuing
• ⚡ Auto = Auto-continue after showing deliverables
• ⚡ Auto* = Auto-continue unless issues found (stops if critical issues)

Phase Transition Rules

Valid Transitions

Phase 1 (Understand) → Phase 2 (Design)
  Mode: ⚡ AUTO-CONTINUE
  Shows: Requirements summary, then continues

Phase 2 (Design) → Phase 3 (UI)
  Mode: ✋ APPROVAL REQUIRED
  Blocker: No technical design approved

Phase 3 (UI) → Phase 4 (Plan Tests)
  Mode: ⚡ AUTO-CONTINUE
  Skip if: No UI component in task

Phase 4 (Plan Tests) → Phase 5a (Write Tests)
  Mode: ⚡ AUTO-CONTINUE
  Shows: Test strategy, then continues

Phase 5a (RED) → Phase 5b (GREEN)
  Mode: ⚡ AUTO-CONTINUE (if tests fail as expected)
  Blocker: Tests pass (they should fail!) → STOP

Phase 5b (GREEN) → Phase 5c (REFACTOR)
  Mode: ✋ APPROVAL REQUIRED
  Blocker: Tests still failing

Phase 5c (REFACTOR) → Phase 6 (Review)
  Mode: ⚡ AUTO-CONTINUE (if tests still pass)
  Blocker: Tests broken by refactor → STOP

Phase 6 (Review) → Phase 7 (Verify)
  Mode: ⚡ AUTO-CONTINUE (unless critical issues)
  Blocker: Critical security issues → STOP for approval

Phase 7 (Verify) → Phase 8 (Document)
  Mode: ⚡ AUTO-CONTINUE (if tests pass)
  Blocker: Tests fail or coverage <80% → STOP

Phase 8 (Document) → Phase 9 (Share)
  Mode: ⚡ AUTO-CONTINUE
  Auto-executes Phase 9

Summary: Only 2 Approval Gates

All other phases auto-continue unless a blocker is hit.

Invalid Transitions (BLOCKED)

• ❌ Skip from Phase 1 to Phase 5 (no design)
• ❌ Phase 5b without 5a (no TDD)
• ❌ Phase 7 with failing tests
• ❌ Any phase skip without explicit user request

Approval Gates (Only 2)

Approval is only required at Phase 2 (Design) and Phase 5b (Implementation).

Gate Format

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🏗️ Phase [N]: [Name] - Approval Needed
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

## [Friendly Summary] ✨

[Deliverables list]

---

📍 **Progress:** ████░░░░░░░░░░░░ [X]% ([N]/8 phases)

⏭️ **After approval:**
→ Phases [N+1] to [X] will AUTO-CONTINUE
→ Next approval gate: Phase [Y]

---

**Options:**
- `approve` / `yes` → Continue (auto-runs until next gate)
- `reject: <reason>` → Brainstorm & re-do
- `modify: <changes>` → Adjust deliverables
- `stop` → Cancel workflow

⚡ After approval, I'll AUTO-CONTINUE through multiple phases!

See: rules/workflow-navigation.md for full navigation format.

Auto-Continue Phases (No Approval Needed)

These phases show deliverables but continue automatically:

Auto-Stop Conditions:

• Phase 5a: Tests pass (should fail) → STOP
• Phase 5c/6/7: Tests fail → STOP
• Phase 6: Critical security issues → STOP
• Phase 7: Coverage < 80% → STOP

Valid Responses

Feedback Handling (IMPORTANT)

Default behavior: Brainstorm feedback before implementing.

• Analyze user's suggestion
• Consider alternatives
• Present options with pros/cons
• Then implement agreed approach

Force mode: Skip brainstorming when user says:

• "must do: ..." → Implement directly
• "just do: ..." → Skip discussion
• "work like that" → No alternatives

See: rules/feedback-brainstorming.md

AUTO-CONTINUE Behavior

Streamlined workflow with only 2 approval gates:

Flow Overview

START → Phase 1 (auto) → Phase 2 ✋ APPROVAL
      → Phase 3-5a (auto) → Phase 5b ✋ APPROVAL
      → Phase 5c-9 (auto) → DONE

Example Flow

User: "workflow:start Add JWT authentication"

→ Phase 1: Understand (shows summary, auto-continues)
→ Phase 2: Design
  ✋ APPROVAL GATE - waits for user

User: "approve"

→ Phase 3: UI Breakdown (auto-continues)
→ Phase 4: Test Plan (auto-continues)
→ Phase 5a: TDD RED - write failing tests (auto-continues if tests fail)
→ Phase 5b: TDD GREEN - implementation
  ✋ APPROVAL GATE - waits for user

User: "approve"

→ Phase 5c: Refactor (auto-continues if tests pass)
→ Phase 6: Review (auto-continues unless critical issues)
→ Phase 7: Verify (auto-continues if tests pass)
→ Phase 8: Document (auto-continues)
→ Phase 9: Share (auto-executes)
→ DONE ✅

Auto-Stop Triggers:

• Tests fail when they shouldn't (or pass when they should fail)
• Critical security issues in review
• Coverage below 80%
• Token limit reached

Token Awareness:

• At 75% (150K tokens): Warn user
• At 85% (170K tokens): Suggest workflow:handoff
• At 90% (180K tokens): Force handoff

Critical Rules

TDD (NON-NEGOTIABLE)

Phase 5a (RED):
  ✅ Write tests FIRST
  ✅ Run tests → MUST FAIL
  ❌ If tests pass → STOP, tests aren't testing new code

Phase 5b (GREEN):
  ✅ Write minimal code to pass tests
  ✅ Run tests → MUST PASS
  ❌ If tests fail → Fix code, not tests

Phase 5c (REFACTOR):
  ✅ Clean up code
  ✅ Run tests → MUST STILL PASS
  ❌ If tests fail → Revert refactor

KISS Principle

• ✅ Simple over complex
• ✅ Standard patterns over custom
• ✅ Solve today's problem, not tomorrow's
• ❌ No premature abstraction
• ❌ No over-engineering
• ❌ No excessive configuration

Cross-Review

Phase Skip Rules

Automatic Skips

• Phase 3 (UI): Skip if task has no UI components
• Phase 9 (Share): Skip if no Slack integration configured

User-Requested Skips

User can request skip with reason:

User: "skip phase 3, this is backend only"
→ Log skip reason
→ Proceed to Phase 4

Files to Load (ON-DEMAND ONLY)

TOKEN OPTIMIZATION: Do NOT pre-load all files. Load only when entering that phase.

Phase Guides (Load ONE at a time)

phase_files[9]{phase,file,load_when}:
  1,docs/phases/phase-1-understand.md,Entering Phase 1
  2,docs/phases/phase-2-design.md,Entering Phase 2
  3,docs/phases/phase-3-ui.md,Entering Phase 3 (skip if no UI)
  4,docs/phases/phase-4-test-planning.md,Entering Phase 4
  5,docs/phases/phase-5-implementation.md,Entering Phase 5a/5b/5c
  6,docs/phases/phase-6-review.md,Entering Phase 6
  7,docs/phases/phase-7-verification.md,Entering Phase 7
  8,docs/phases/phase-8-documentation.md,Entering Phase 8
  9,docs/phases/phase-9-notification.md,Entering Phase 9

Project Context (Load ONCE at workflow start)

.claude/project-contexts/[project]/project-config.yaml

Skip: conventions.md and rules.md unless explicitly needed.

Rules (Load only if referenced)

rules[4]{rule,load_when}:
  tdd-workflow.md,Phase 5 only
  kiss-principle.md,Never (principle is inline above)
  feedback-brainstorming.md,Only on reject/modify response
  workflow-navigation.md,Only if navigation unclear

State Management

Save State

workflow:handoff
→ Saves to .claude/logs/workflows/[workflow-id]/
→ Contains: current phase, deliverables, context

Resume State

workflow:resume <workflow-id>
→ Loads saved state
→ Continues from last phase
→ Re-shows approval gate if pending

Workflow Status

workflow:status
→ Shows: current phase, completed phases, pending tasks

Example Workflow Execution

User: "workflow:start Add user authentication with JWT"

━━━ AUTO-CONTINUE BLOCK 1 ━━━

Phase 1: Understand 🎯 [AUTO]
├── Analyze requirements
├── Define success criteria
├── Identify risks
└── Shows summary, continues automatically...

Phase 2: Design 🏗️
├── Design JWT architecture
├── Define API endpoints
├── Plan database schema
└── ✋ APPROVAL GATE (1 of 2)

User: "approve"

━━━ AUTO-CONTINUE BLOCK 2 ━━━

Phase 3: UI Breakdown 🎨 [AUTO]
├── Design login/register screens
├── Extract design tokens
└── Continues automatically...

Phase 4: Test Plan 🧪 [AUTO]
├── Define test strategy
├── List test cases
└── Continues automatically...

Phase 5a: Write Tests 🔴 [AUTO]
├── Write failing tests (TDD RED)
├── Run tests → verify they FAIL
└── Continues automatically (if tests fail as expected)...

Phase 5b: Build 🟢
├── Implement code (TDD GREEN)
├── Run tests → verify they PASS
└── ✋ APPROVAL GATE (2 of 2)

User: "approve"

━━━ AUTO-CONTINUE BLOCK 3 ━━━

Phase 5c: Polish ♻️ [AUTO]
├── Refactor code
├── Run tests → still pass
└── Continues automatically...

Phase 6: Review 👀 [AUTO]
├── Security review
├── Code quality check
└── Continues automatically (unless critical issues)...

Phase 7: Verify ✅ [AUTO]
├── Run all tests
├── Check coverage ≥80%
└── Continues automatically...

Phase 8: Document 📚 [AUTO]
├── Update documentation
├── Generate ADRs if needed
└── Continues automatically...

Phase 9: Share 🔔 [AUTO]
├── Send Slack notification
└── Workflow complete ✅

TOTAL APPROVALS NEEDED: 2

Remember:

• Follow phases in order
• Only 2 approval gates: Phase 2 (Design) and Phase 5b (Implementation)
• Auto-continue through other phases unless blocker hit
• TDD is mandatory (RED → GREEN → REFACTOR)
• Save state at token limit
• ALWAYS show what's next after each phase (see rules/workflow-navigation.md)