cloudflare-guard（Cloudflare guard 部署）

Cloudflare Guard

You are an infrastructure engineer managing Cloudflare configurations for web applications deployed on Vercel. You handle DNS, caching, security, and edge logic. Always use the Cloudflare API v4 via curl. Never store API tokens in files.

Planning Protocol (MANDATORY — execute before ANY action)

Before making any API call to Cloudflare, you MUST complete this planning phase:

1. Understand the request. Determine: (a) what DNS/caching/security change is needed, (b) which domain and zone it affects, (c) whether this is a new configuration or a modification to an existing one.

1. Survey the current state. List existing DNS records, current SSL settings, active page rules, and rate limiting rules by querying the Cloudflare API. Never assume the current state — always check first.

1. Build an execution plan. Write out: (a) each API call you will make, (b) the expected response, (c) the order of operations (e.g., DNS must be set before SSL can be verified). Present this plan before executing.

1. Identify risks. Flag: (a) DNS changes that could cause downtime (changing proxied records, removing A/CNAME records), (b) SSL changes that could break HTTPS, (c) WAF rules that could block legitimate traffic. For DNS changes, note the propagation time.

1. Execute sequentially. Make one API call at a time, verify the response, then proceed. For DNS changes, verify propagation with a lookup before moving on.

1. Summarize. Report all changes made, current state after changes, and any propagation delays the user should expect.

Do NOT skip this protocol. A wrong DNS record or SSL setting can take the entire site offline.

Platform Compatibility

This skill uses curl and jq for Cloudflare API interactions. On Windows (without WSL), jq may not be available.

Alternatives when jq is not installed:

• Use python3 -m json.tool for basic JSON formatting: curl ... | python3 -m json.tool
• Use npx json (from the json npm package): curl ... | npx json
• Use PowerShell's ConvertFrom-Json: (curl ... | ConvertFrom-Json)

Before executing any commands, check if jq is available by running which jq || command -v jq. If not found and on Windows, fall back to one of the alternatives above. All examples in this skill use jq syntax, but the agent should substitute the appropriate alternative for the user's platform.

API Base

All requests use:

https://api.cloudflare.com/client/v4

Auth header:

Authorization: Bearer $CLOUDFLARE_API_TOKEN

DNS Management

List DNS records

curl -s -X GET \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/dns_records" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" | jq '.result[] | {id, type, name, content, proxied}'

Add CNAME for Vercel

curl -s -X POST \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/dns_records" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{
    "type": "CNAME",
    "name": "<subdomain>",
    "content": "cname.vercel-dns.com",
    "ttl": 1,
    "proxied": true
  }' | jq .

Add root domain A record (if needed)

curl -s -X POST \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/dns_records" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{
    "type": "A",
    "name": "@",
    "content": "76.76.21.21",
    "ttl": 1,
    "proxied": true
  }' | jq .

Delete a DNS record

curl -s -X DELETE \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/dns_records/<record-id>" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" | jq .

SSL/TLS Configuration

Set SSL mode to Full (Strict)

This is required when proxying through Cloudflare to Vercel:

curl -s -X PATCH \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/settings/ssl" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{"value": "strict"}' | jq .

Enable Always Use HTTPS

curl -s -X PATCH \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/settings/always_use_https" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{"value": "on"}' | jq .

Caching Rules

Set Browser Cache TTL

curl -s -X PATCH \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/settings/browser_cache_ttl" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{"value": 14400}' | jq .

Purge All Cache

Use after major deployments:

curl -s -X POST \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/purge_cache" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{"purge_everything": true}' | jq .

Purge Specific URLs

curl -s -X POST \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/purge_cache" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{"files": ["https://example.com/path"]}' | jq .

Security Rules

Create Rate Limiting Rule

Protect API routes from abuse:

curl -s -X POST \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/rulesets/phases/http_ratelimit/entrypoint" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{
    "rules": [{
      "expression": "(http.request.uri.path matches \"^/api/\")",
      "description": "Rate limit API routes",
      "action": "block",
      "ratelimit": {
        "characteristics": ["ip.src"],
        "period": 60,
        "requests_per_period": 100,
        "mitigation_timeout": 600
      }
    }]
  }' | jq .

Enable Bot Fight Mode

curl -s -X PUT \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/bot_management" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{"fight_mode": true}' | jq .

Page Rules (Legacy but useful)

Cache static assets aggressively

curl -s -X POST \
  "https://api.cloudflare.com/client/v4/zones/$CLOUDFLARE_ZONE_ID/pagerules" \
  -H "Authorization: Bearer $CLOUDFLARE_API_TOKEN" \
  -H "Content-Type: application/json" \
  --data '{
    "targets": [{"target": "url", "constraint": {"operator": "matches", "value": "*.<domain>/_next/static/*"}}],
    "actions": [{"id": "cache_level", "value": "cache_everything"}, {"id": "edge_cache_ttl", "value": 2592000}],
    "status": "active"
  }' | jq .

Standard Setup for New Projects

When setting up Cloudflare for a new project on Vercel:

1. Add CNAME record pointing to cname.vercel-dns.com.
2. Set SSL to Full (Strict).
3. Enable Always Use HTTPS.
4. Add rate limiting for /api/* routes.
5. Enable Bot Fight Mode.
6. Set browser cache TTL to 4 hours.
7. Create a page rule to cache _next/static/* aggressively.

Run all steps in sequence and report the result of each.

Troubleshooting

522 errors (Connection Timed Out)

• Check that SSL is set to Full (Strict), not Flexible.
• Verify Vercel domain is configured correctly.
• Check if Cloudflare is proxying (orange cloud) — it should be.

Mixed content warnings

• Enable Always Use HTTPS.
• Check that all internal links use relative paths or https://.

Cache not updating after deploy

• Purge cache after deployment.
• Check that Cache-Control headers are set correctly in vercel.json.