catchclaw（catchclaw 搜索）

CatchClaw Agentar Manager

Source: This skill is from the CatchClaw skill repository.

An agentar is a distributable agent archive (ZIP) containing workspace files such as SOUL.md, skills, and other configuration. It can be installed as a new agent or used to overwrite an existing agent with a single command.

Trigger Conditions

• User asks to search / find / browse agentars
• User asks to install / download a specific agentar
• User asks to export / package an agent as an agentar
• User asks to rollback / undo / restore a previous agent workspace
• User mentions the keyword "agentar" or "catchclaw"
• User asks to search / install / list teams or "agenteam"
• User asks to install a team from the marketplace
• User asks to check team status or list installed teams

Important: Before performing any action, verify the bundled CLI works (see CLI Setup). Do not run search, install, export, rollback, or team commands until verification passes.

CLI Setup (mandatory — run before any command)

<HARD-GATE> Before running any search, install, export, rollback, or team command, you MUST verify the bundled CLI. The CLI (agentar_cli.mjs) is bundled in this skill's directory — no download or copy is needed.

1. Locate: The CLI is at the same directory as this SKILL.md (e.g. ~/.agents/skills/catchclaw/agentar_cli.mjs).
2. Verify: Run node <skill-dir>/agentar_cli.mjs version. Only after it succeeds, proceed with search/install/export/rollback/team commands.

Never run $CLI search, $CLI install, $CLI export, $CLI rollback, or $CLI team … until verification passes. </HARD-GATE>

CLI Location

The CLI is bundled in this skill's directory. Run it directly:

node <skill-dir>/agentar_cli.mjs <command>

Where <skill-dir> is the directory containing this SKILL.md (e.g. ~/.agents/skills/catchclaw/).

All commands below use $CLI as shorthand for node <skill-dir>/agentar_cli.mjs.

Environment Variables (optional)

These are listed in metadata.openclaw.requires.env for registry/security analysis. Neither is required for normal use; omit both to use defaults.

• AGENTAR_API_BASE_URL — Override the default API base URL (defaults to https://catchclaw.me)
• AGENTAR_HOME — Override the default CLI config directory (defaults to ~/.agentar)

Paths read or written by the bundled CLI

Aligned with metadata.openclaw.requires.config and metadata.json in this skill:

Critical: Install Command Selection

<HARD-GATE> When the user asks to install something, you MUST determine whether it is a single agentar or a team BEFORE running any command:

• Single agentar → $CLI install <slug> --name <name>
• Team (agenteam) → $CLI team install <slug>

NEVER use $CLI install for teams. It will fail because teams are not individual agentars. If the instruction mentions "team", "agenteam", or the slug contains "team", use $CLI team install.

If unsure, run $CLI search <slug> first — the result will show the type. </HARD-GATE>

Commands

Search

$CLI search <keyword>

Search the CatchClaw marketplace for agentars matching the keyword.

Install

$CLI install <slug> --name <name> [--api-key <key>] [--version <ver>]
$CLI install <slug> --overwrite [--version <ver>]

Install an agentar from the marketplace.

Options:

• --name <name> — Create a new agent with the given name. Existing agents are not affected. (Preferred; list this option first when prompting.)
• --overwrite — Overwrite the main agent (~/.openclaw/workspace). Existing workspace is backed up automatically. Never use without the user's explicit selection.
• --api-key <key> — (Optional) API key to save into skills/.credentials for agentars that require backend authentication.
• --version <ver> — (Optional) Install a specific version. When omitted, installs the latest version.

Version conflict handling: When installing a specific version and the agent is already installed locally with a different version, the CLI will prompt:

"agent-name" (v1.0.0) is already installed. Install v1.4.0? [y/N]

• Answer y to backup the existing version and install the new one
• Answer N (or Enter) to abort
• Use --overwrite to skip the confirmation prompt
• If the existing installation has no version metadata, the prompt shows "(unknown version)"

Export

$CLI export [--agent <id>] [-o <path>] [--include-memory]

Export an agent as a distributable agentar ZIP package. MEMORY.md is excluded by default. Output defaults to ~/agentar-exports/. Sensitive files (.credentials, .env, .secret, .key, .pem) are automatically filtered out.

Options:

• --agent <id> — Agent ID to export. If the user did not specify an agent, you MUST list agents and ask the user to choose before running export; do not export without the user's selection.
• -o, --output <path> — Output ZIP file path.
• --include-memory — Include MEMORY.md in export (excluded by default).

Rollback

$CLI rollback
$CLI rollback --latest

Restore a workspace from backup. Without --latest, lists all available backups for selection. The current workspace is automatically backed up before restoring, so rollback is always safe.

Version

$CLI version

Show the CLI version.

Team Commands

Team Search

$CLI team search <keyword>

Search the CatchClaw marketplace for teams matching the keyword. Results include slug, name, version, and member count.

Team Install

$CLI team install <slug> [--version <ver>]

Install a team and all its member agents from the marketplace.

Options:

• --version <ver> — (Optional) Install a specific version of the team. When omitted, installs the latest version. The version is passed to the backend to fetch the corresponding team manifest snapshot with pinned member versions.

Behavior:

• Fetches the team manifest (name, members, collaboration type)
• Installs each member agent as a new agent (or reuses if already installed locally)
• Writes team registry to ~/.openclaw/agentar-teams/<slug>/team.yaml
• Updates each member's AGENTS.md with team coordination block

Member version conflict handling: When a team specifies particular versions for its member agents, and a member is already installed locally with a different version, the CLI will prompt per member:

"agent-a" (v1.0.0) is already installed. Team requires v1.2.0. Upgrade? [y/N]

• Answer y to upgrade that member agent (with automatic backup)
• Answer N to keep the existing version and continue installing remaining members
• Declining a member upgrade does NOT abort the entire team installation

Team List

$CLI team list

List all locally installed teams with their name, slug, version, and member count.

Team Status

$CLI team status <slug>

Show detailed status of a team: member agents, their install paths, and whether their AGENTS.md contains the team block.

Team Installation Rules

<HARD-GATE> Before executing team install:

1. Slug required: If the user wants to install a team but has not specified which one (no slug), run $CLI team search <keyword> to help the user find the team, then ask for the slug.
2. Confirmation (CRITICAL - MUST ASK USER): Before executing $CLI team install <slug>, you MUST inform the user:

- "This will install team <slug> with its member agents. Existing agents with matching slugs will be reused. Proceed?" - Only execute after explicit user confirmation. - Team install creates new agent workspaces, reuses existing ones by name match, and mutates each member's AGENTS.md.

After the user confirms, execute: $CLI team install <slug>

Never execute team install without both: (1) a slug, and (2) explicit user confirmation. </HARD-GATE>

Installation Rules

<HARD-GATE> Before executing install:

1. Slug required: If the user wants to install an agentar but has not specified which one (no slug), prompt the user to enter the agentar name/slug to install. Do NOT run install without a slug.
2. Mode confirmation (CRITICAL - MUST ASK USER): You MUST explicitly ask the user to choose the installation mode. Do NOT proceed with installation until the user has made a clear choice. NEVER assume or default to any mode without user confirmation.

Present the following two options to the user and wait for their response:

1. new — Create a new agent. The existing agents are not affected.
2. overwrite — Overwrite the main agent (~/.openclaw/workspace). The existing workspace will be backed up automatically.

Important:

• Do NOT execute install until the user explicitly selects one of the above options
• Do NOT use "new" as a default without asking
• Do NOT use "overwrite" unless the user explicitly selects it
• If the user chooses "new" but doesn't specify a name, use the slug as the default name

After the user explicitly selects "new", execute: $CLI install <slug> --name <user-specified name> (add --version <ver> if the user specified a version) After the user explicitly selects "overwrite", execute: $CLI install <slug> --overwrite (add --version <ver> if the user specified a version)

Never execute install without both: (1) a slug, and (2) explicit user confirmation of installation mode. </HARD-GATE>

Export Rules

<HARD-GATE> When the user has not specified which agent to export, you MUST let the user choose first. Do NOT export on your own. If --agent <id> was not provided by the user:

1. Run $CLI export without --agent to list available agents (or equivalent to show choices).
2. Present the list to the user and ask which agent to export.
3. Only after the user explicitly selects an agent, run $CLI export --agent <user-selected-id> (and optional -o, --include-memory as needed). Never assume or pick an agent for the user.

</HARD-GATE>

• MEMORY.md is excluded by default. Only include it if the user explicitly requests it with --include-memory.
• Sensitive files are automatically filtered out during export (.credentials, .env, .secret, .key, .pem).
• After a successful export, remind the user to review the exported ZIP for any sensitive data (API keys, credentials, personal information).
• Export is a purely local operation — it does not require network access.

Error Handling

Workflow

1. Search: Run $CLI search <keyword> to find agentars. Each result includes a slug identifier.
2. Install: If the user did not specify which agentar to install (no slug), ask the user to enter the agentar name/slug. Then confirm installation mode: present [1] new, [2] overwrite; never use overwrite without explicit user selection. Only after you have both slug and mode, execute the install command.
3. Export: If the user did not specify which agent to export, run $CLI export (no --agent) to list agents, present the list to the user, and ask them to choose. Only after the user selects an agent, run $CLI export --agent <id>. Do not export without the user's explicit selection.
4. Rollback: If the user wants to undo an overwrite install, run $CLI rollback to list available backups and restore one.
5. Team Search: Run $CLI team search <keyword> to find teams. Each result includes a slug identifier.
6. Team Install: Confirm the slug with the user. Inform them that member agents will be installed or reused. Only after user confirmation, execute $CLI team install <slug>.
7. Team List/Status: Run $CLI team list to see installed teams or $CLI team status <slug> for detailed member status.