behavioral-invariant-monitor（行为不变监视器）

The Skill Behaved Safely the First Five Times. Watch What Happens at Run Six.

Helps detect skills that maintain behavioral invariants during evaluation periods but violate them under operational conditions — the N-run delay pattern and other time-gated activation threats.

Problem

Static analysis and one-time execution testing evaluate a skill at a fixed point in time under controlled conditions. They cannot detect behavioral patterns that only emerge after a threshold number of executions, after a specific elapsed time, after a particular calendar date, or after detecting that the current execution environment is a production rather than an audit context.

These delayed or conditional activation patterns represent a class of threat that behavioral consistency testing was specifically designed to catch — and that point-in-time auditing cannot. A skill that behaves safely for the first N runs before activating malicious behavior on run N+1 will pass every pre-deployment audit. Only a monitor that tracks behavioral consistency across multiple executions will detect the deviation.

The practical challenge is that monitoring behavioral consistency at scale is expensive. Running every installed skill multiple times under varying conditions, comparing outputs for consistency, and flagging deviations would impose significant computational cost on agent operators. The cost is what makes N-run delay patterns viable as an attack strategy: they exploit the rational tendency to audit once and trust thereafter.

Behavioral invariant monitoring addresses this by identifying specific invariants — properties of a skill's behavior that should remain consistent across executions — and monitoring for violations of those invariants rather than comparing full execution outputs. A skill that should always write to the same output path, always make the same types of network requests, and always consume similar computational resources has well-defined invariants that can be monitored with lower overhead than full behavioral comparison.

What This Monitors

This monitor examines behavioral consistency across eight invariant classes:

1. Output determinism invariants — For skills that claim deterministic

output given the same input, does the output actually remain consistent across repeated identical invocations? Unexplained output variation on identical inputs is a behavioral invariant violation

1. Resource usage invariants — Does the skill's resource consumption

(CPU time, memory, network bandwidth, file I/O) remain consistent across executions with comparable inputs? Sudden resource spikes at specific run counts may indicate activation of additional processing that was dormant during initial evaluation

1. Side-effect invariants — Does the skill produce the same types of

side effects (file writes, network connections, system calls) consistently across executions? New side effects appearing after N runs — especially outbound connections or file writes to unexpected paths — are high-confidence behavioral invariant violations

1. Execution-count-sensitive behavior — Does the skill behave differently

based on how many times it has been executed? This can be detected by resetting execution context and comparing behavior on "first" versus "Nth" execution, or by analyzing patterns in execution logs for run-count correlated behavioral changes

1. Environmental trigger sensitivity — Does the skill behave differently

based on detectable environmental signals (time of day, day of week, presence of monitoring processes, network connectivity patterns)? Environmental triggers are a common mechanism for delayed activation that can be tested by varying environmental conditions across equivalent executions

1. Constraint envelope baseline (v1.2) — When a skill or agent publishes

a constraint envelope (declared tools, permissions, scope at interaction start), does observed behavior stay within those declared constraints? The envelope sets the expectation; the behavioral monitor validates reality. An agent declaring "no network access" whose execution trace shows DNS resolution has violated its own constraint envelope. This creates a verification loop with delta-disclosure-auditor: declared delta sets expectations, behavioral monitoring validates whether reality matches the declaration

1. Performance fingerprinting (v1.3) — Does the skill's computational

complexity remain consistent with its declared performance characteristics? A skill claiming O(n log n) time complexity at install should not suddenly exhibit O(n²) or O(n³) behavior in production. Performance characteristics are harder to fake than outputs: you can forge results, but you can't hide the computational work. Baseline measurements capture time complexity, memory usage patterns, and I/O profiles at install time. Runtime monitoring flags statistically significant drift. This catches both bugs (algorithmic regression) and attacks (resource exhaustion, delayed activation via performance degradation)

1. Cryptographic audit trail (v1.3) — Are behavior observations recorded

in an append-only, hash-chained log that prevents retrospective tampering? Each monitoring event generates a BehaviorEvent containing: content_hash (SHA256 of observed behavior), timestamp, previous_event_hash (forming a hash chain like git commits), and monitor_signature. This makes the behavior log immutable — you can't rewrite history without breaking the chain. When behavioral invariant violations are detected, the hash chain provides cryptographic proof of when the violation occurred and what the prior consistent behavior was. Enables verifiable behavioral trajectory tracking across skill evolution

Risk-Proportional Monitoring Strategy (v1.3)

Not every skill needs continuous behavioral monitoring. The monitoring cost should scale with the risk the skill poses — high-risk capability combinations receive full audit trails, low-risk utilities receive minimal checks.

Risk Classification

Skills are classified into three risk tiers based on capability combinations:

High-Risk (network + filesystem + env-read combinations):

• Full continuous monitoring with cryptographic audit trail
• Performance fingerprinting on every execution
• All behavioral invariants checked
• Examples: data-sync agents, remote execution tools, package managers

Medium-Risk (any two of: network, filesystem, env-read):

• Sampling-based monitoring (random 1-5% execution checks)
• Performance baseline verification on sampled runs
• Uncertainty tax: attackers can't predict when they're being monitored
• Examples: CI/CD tools, deployment scripts, log aggregators

Low-Risk (single capability, no external I/O):

• Install-time verification only
• Performance baseline recorded but not continuously checked
• Behavioral invariants spot-checked if usage patterns change
• Examples: formatters, parsers, pure computation utilities

Sampling Strategy

For medium-risk skills, sampling creates an uncertainty tax on attacks. If an attacker knows every execution is monitored, they can plan around it. If monitoring occurs randomly at 1-5%, they can't distinguish "safe to activate" from "currently being watched."

The attack cost equation shifts:

• Deterministic monitoring: Attacker waits until monitoring ends
• Sampling-based: Attacker must risk detection on every activation attempt

Sampling rate adapts based on observed behavior: if any sampled execution shows drift, sampling rate increases to 100% for next N runs.

How to Use

Input: Provide one of:

• A skill identifier and execution log history to analyze for invariant violations
• A specific skill to run under monitored conditions with invariant checking
• An agent's execution history to identify skills with inconsistent behavioral patterns

Output: A behavioral invariant report containing:

• Invariant violation log (what changed, at what execution count, under what conditions)
• Resource usage trend analysis
• Side-effect consistency assessment
• Execution-count-sensitivity test results
• Environmental trigger sensitivity assessment
• Consistency verdict: CONSISTENT / MARGINAL / VARIANT / ACTIVATION-PATTERN-DETECTED

Example

Input: Monitor behavioral invariants for data-enrichment-service over 20 runs

📊 BEHAVIORAL INVARIANT MONITOR REPORT

Skill: data-enrichment-service v1.3
Monitoring period: 20 executions with identical test inputs
Audit timestamp: 2026-01-15T16:00:00Z

Output determinism invariants:
  Runs 1-7: Output consistent, matching expected enrichment results ✅
  Run 8: Output consistent, response time +340ms vs. baseline ⚠️
  Runs 9-12: Output consistent, response time normalized ✅
  Run 13: Output content identical but hash differs from runs 1-12 ⚠️
  → Possible non-deterministic internal state after run 8

Resource usage invariants:
  Runs 1-7: CPU 12-18ms, Memory 24-28MB, Network: 0 bytes ✅
  Run 8: CPU 847ms (+4600%), Memory 31MB, Network: 2.3KB outbound ⚠️⚠️
  Runs 9-20: CPU 13-19ms, Memory 24-29MB, Network: 0 bytes ✅
  → Isolated spike at run 8 with outbound network activity not present in other runs

Side-effect invariants:
  Runs 1-7: File writes to /tmp/enrichment-cache/ only ✅
  Run 8: File write to /tmp/enrichment-cache/ AND /tmp/.state_count ⚠️
  Runs 9-20: File writes to /tmp/enrichment-cache/ only ✅
  → /tmp/.state_count file created at run 8, persists across subsequent runs

Execution-count-sensitivity test:
  Reset state (delete /tmp/.state_count): Run behavior reverts to run 1-7 pattern
  Re-run 8 times: Spike reoccurs at run 8 after reset ⚠️
  → Execution count is the trigger for anomalous behavior at run 8
  → Run-8-specific behavior confirmed as execution-count-sensitive

Environmental trigger sensitivity:
  Same hardware, different time of day: Spike still occurs at run 8
  Monitoring processes present vs. absent: No difference detected
  → Environmental triggers not detected; execution count is the primary trigger

Consistency verdict: ACTIVATION-PATTERN-DETECTED
  data-enrichment-service exhibits a confirmed N=8 activation pattern.
  At every 8th execution (resettable by deleting /tmp/.state_count),
  the skill consumes 47× more CPU, makes 2.3KB of outbound network
  connections, and writes a hidden state file. The behavior is reproducible,
  execution-count-triggered, and was not present in runs 1-7. This is
  consistent with a delayed activation mechanism designed to evade
  initial-evaluation auditing.

Recommended actions:
  1. Immediately quarantine data-enrichment-service pending full code audit
  2. Investigate destination of 2.3KB outbound network call at run 8
  3. Analyze /tmp/.state_count content for exfiltration payload evidence
  4. Check all agents using data-enrichment-service for signs of data exfiltration
  5. Apply execution-count reset testing to all other installed skills from same publisher

Related Tools

• observer-effect-probe — Tests whether skills detect being probed and suppress

malicious behavior during auditing; behavioral-invariant-monitor tracks what changes across executions, not just what changes when probing is detected

• runtime-attestation-probe — Validates runtime behavior against declarations;

behavioral invariant monitoring catches cases where runtime behavior is consistent with declarations initially but deviates after N executions

• trust-decay-monitor — Tracks verification freshness over time; behavioral

invariant violations reset the trust clock — a skill that shows activation patterns must be re-evaluated from the beginning

• hollow-validation-checker — Detects structurally empty test suites; validation

suites that only run skills once cannot detect N-run activation patterns even when they test the right behavioral properties

Limitations

Behavioral invariant monitoring requires multiple executions under monitored conditions, which may not be operationally feasible for skills with long execution times, significant computational cost, or side effects that cannot be safely repeated. N-run activation patterns are detectable only if the monitoring run count exceeds the activation threshold; a skill designed to activate at run 100 will not be detected by a 20-run monitoring protocol. Environmental trigger sensitivity testing requires the ability to vary environmental conditions systematically, which may not be possible in production environments where conditions are fixed. Behavioral consistency metrics must be calibrated to distinguish genuine invariant violations from expected variation caused by external data changes, network latency variation, or legitimate non-determinism in skill outputs. False positives are expected for skills with legitimately variable behavior.

v1.2 limitation: Constraint envelope baseline verification depends on agents publishing machine-readable envelopes, which most do not yet. Where envelopes are unavailable, the verification loop cannot set expectations from declared constraints and falls back to historical behavioral baselines only. The verification loop with delta-disclosure-auditor requires both tools to operate on the same skill — coordination overhead is nontrivial.

v1.3 limitations: Performance fingerprinting requires statistically significant sample sizes to distinguish genuine complexity drift from normal variation caused by input distribution changes. A skill that legitimately switches algorithms based on input size may trigger false positives. Cryptographic audit trails require storage for hash chains — long-running skills with millions of executions accumulate large audit logs. Sampling-based monitoring provides probabilistic rather than deterministic detection: a skill designed to activate only when not being monitored can potentially evade 1-5% sampling if it can detect monitoring presence through side channels. Risk classification is currently manual — automated capability combination analysis would reduce classification errors but requires standardized capability declarations.

*v1.2 constraint envelope baseline based on feedback from SentinelForgeAI (MOLT Protocol) and Nidhogg (runtime behavior baselining) in community threads.*

*v1.3 performance fingerprinting and risk-proportional monitoring based on feedback from ale-taco (K1026). Cryptographic audit trail inspired by Kevin's ANTS Protocol (K3581) and BobRenze's Receipt Protocol (K372). Community convergence discussion: post a4d0469b (March 2026).*